BeA, Senco or Stanley Bostitch air nailers, staplers. Spenax hog ring pliers and Hartco clip guns for aluminium, galvanized and stainless steel nails - staples - hog rings or clips

Order manual or pneumatic fastening tools and collated nails, staples, hog rings and clips online... Bostitch parts too!


Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.
 

Aluminum Coil Nails - Stainless Steel Coil Nails

Air Coil Nails for Siding - Fencing - Crating

Pneumatic Fasteners

Coil Nails to Fit:

Pneumatic Nails - Air Nails

15 Degree Wire Collated

Stainless Steel Coil Nails

15 Degree Plastic Collated

Aluminum Coil Nails

Crating Coil Nails

Fencing Coil Nails

Siding Coil Nails

Bostitch: N50C, N55C, N557C, N64C

Hitachi: NV65AH

Makita: AN611

Max: CN565

Porter Cable: COIL200, COIL250

Senco: SCN45, SCN55S

Coil Siding Nailers - Crating Nailers - Fencing Nailers

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.

Buy Coil Nailers available online...see below.

Construction, Furniture or Industrial Applications

 Pneumatic Nailers - Air Nailers

 

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.

Stainless Steel Coil Nails

 

15 Degree Coil Siding Nails - C Series Air Nails
  Click Item Number for Your Price Length (Inches) Points Finish Shank Type Coil Nails Below Fit Coil Nailers: Quantity Per Box Weight Per Case (lbs.) Cases Per Pallet
  C3R90BDSS
1-1/4
 Blunt Diamond Stainless Steel
.090 Ring
 N50C, N55C, N57C-1, N63CP, N64C-1
3600
 11.85 80
  C4R90BDSS
1-1/2
 Blunt Diamond Stainless Steel
.090 Ring
 N50C, N55C, N57C-1, N63CP, N64C-1
3600
 11.85 80
  C5R90BDSS
1-3/4
 Blunt Diamond Stainless Steel
.090 Ring
 N50C, N55C, N57C-1, N63CP, N64C-1
3600
 13.75 64
  C6R90BDSS
2
 Blunt Diamond Stainless Steel
.090 Ring
 N50C, N55C, N57C-1, N63CP, N64C-1
3600
 15.30 64
  C7R90BDSS
2-1/4
 Blunt Diamond Stainless Steel
.090 Ring
 N50C, N55C, N57C-1, N63CP, N64C-1
3600
 16.55 56
  C7R90BDSS-7120
2-1/4
 Blunt Diamond Stainless Steel Lt Brown
.090 Ring
 N50C, N55C, N57C-1, N63CP, N64C-1
3600
 N/A N/A
  All of these above also fit:  Hitachi: NV65AH (1 1/2" - 2 1/2"), Makita: AN611 (1 1/4" - 2 1/2"), Max: CN565 (1 1/4" - 2 1/2"), Porter Cable: COIL200 (1 1/4" - 2"), COIL250 (1 1/2" - 2 1/2"), Senco: SCN45 (1" - 2"), SCN55S (1 1/2" - 2 1/2")
 
 

DS Manco™ Online Pneumatic Fasteners - Pneumatic Nails - Air Nails  - 15 Degree Wire Collated Coil Siding Stainless Steel Nails, Stainless Steel Crating Nails, Stainless Steel Fencing Nails and Stainless Steel Coil Nails for construction, furniture or industrial applications.

 

15 Degree Coil Siding Nails - AC Series Air Nails

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.
  Click Item Number for Your Price Length (Inches) Points Finish Shank Type Coil Nails Below Fit Coil Nailers: Quantity Per Box Weight Per Case (lbs.) Cases Per Pallet
  AC8DRSS
2-1/2
 Blunt Diamond Stainless Steel
.090 Ring
 N63CP, N64C-1, N65CP
3600
 19.10 56
  All of these above also fit:  Hitachi: NV65AH (1 1/2" - 2 1/2"), Makita: AN611 (1 1/4" - 2 1/2"), Max: CN565 (1 1/4" - 2 1/2"), Porter Cable: COIL200 (1 1/4" - 2"), COIL250 (1 1/2" - 2 1/2"), Senco: SCN45 (1" - 2"), SCN55S (1 1/2" - 2 1/2")
 
 

Pneumatic Fasteners - Pneumatic Nails - Air Nails  - 15 Degree Wire Collated Coil Siding Stainless Steel Nails, Stainless Steel Crating Nails, Stainless Steel Fencing Nails and Stainless Steel Coil Nails for construction, furniture or industrial applications.

Aluminum Coil Nails

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.

 

15 Degree Coil Siding Nails - Aluminum Series Air Nails
  Click Item Number for Your Price Length (Inches) Points Finish Shank Type Coil Nails Below Fit Coil Nailers: Quantity Per Box Weight Per Case (lbs.) Cases Per Pallet
  ACP5DSALM 1-3/4 Inch Coil Nail Aluminum .099 Screw Shank Diamond Point 2400 per Unit; Fit N63CP, N65CP, N64CP* - Nails also fit:  Hitachi: NV65AH, Makita: AN611, Max: CN565 , Senco:  SCN45 (1" - 2"), SCN55S (1 1/2" - 2 1/2")   * With door conversion kit: Accessory Item #112670 5.75 108
  ACP6DSALM 2 Inch Coil Nail Aluminum .099 Screw Shank Diamond Point 2400 per Unit; Fit N63CP, N65CP, N64CP* - Nails also fit:  Hitachi: NV65AH, Makita: AN611, Max: CN565 , Senco:  SCN45 (1" - 2"), SCN55S (1 1/2" - 2 1/2")   * With door conversion kit: Accessory Item #112670 6.00 99
  ACP6DCRALM10M
2 Inch Coil Nail Aluminum .099 Ring Shank Diamond Point 10M per Unit; Fit N63CP, N65CP, N64CP* - Nails also fit:  Hitachi: NV65AH, Makita: AN611, Max: CN565 , Senco:  SCN45 (1" - 2"), SCN55S (1 1/2" - 2 1/2")   * With door conversion kit: Accessory Item #112670

 N/A N/A
 

Pneumatic Fasteners - Pneumatic Nails - Air Nails  - 15 Degree Plastic Collated Aluminum Coil Siding Nails, Aluminum Crating Nails, Aluminum Fencing Nails and Aluminum Coil Nails for many more construction, furniture or industrial applications.
Bostitch Solutions for Changes to Pressure Treated Lumber
 
Information Regarding Corrosion - For many years, the industry standard wood preservative has been CCA (Chromated Copper Arsenate). Effective January 1st, 2004, the pressure treated wood industry voluntarily agreed to remove arsenic from the wood treating process. Internal and independent testing has proven that the “new” pressure treated wood formulations (Alkaline Copper Quaternary - ACQ, Copper Azole, etc.) are more corrosive to fasteners

Bostitch recognizes the need to offer fastener solutions to address code official requirements, wood manufacturers recommendations, and most of all, construction professionals concerns. For the most extreme corrosive environments, stainless steel fasteners are the best recommendation. Bostitch currently offers grade 304 stainless steel fasteners in all types of collation. For fasteners used with the new pressure treated wood in less corrosive environments, Bostitch has you covered.

For our full line of wire-welded stick and coil nails, Bostitch introduces THICKCOAT™ galvanization. This new technology in galvanization was designed specifically to protect against today’s more corrosive pressure treated lumber. This new coating technology uses an enhanced electro-galvanization process to apply more than 2½ times the amount of zinc than conventional electro-plating. Coupled with this dense zinc coating is a rust-resistant chromate overcoat. AWPA E-12 laboratory testing has shown that THICKCOAT™ galvanized fasteners corrode at approximately half the rate of our leading competitors.

For plastic collated round head strip nails, Bostitch offers a full line of Hot Dipped Galvanized nails. Our Hot Dipped Galvanized nails meet or exceed ASTM A153 zinc weight specification. This ensures a thick zinc coating to provide superior corrosion resistance.

Bostitch continues to conduct the most extensive corrosion testing of fasteners in the industry. Our testing is conducted in accordance with the ASTM B117 or AWPA E-12 specifications. This testing is what gives us the confidence to recommend our stainless steel, Thickcoat™ galvanized and hot dipped galvanized fasteners for use in the new pressure treated wood.
  Pneumatic Tools - Pneumatic Nailers - Air Nailers - 15 Degree Wire Collated Coil Siding Nailers, Crating Nailers, Fencing Nailers and Coil Nailers for construction, furniture or industrial applications.
Applications Include: Wood Siding, Fiber Cement Siding, Shingles, Fencing, Pallets & Crating, Decking, Wood Sheathing to Light Gauge Steel

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.

N64C Specifications:

  • Driving Power (Inch Lbs.):570
  • Nail Range:1 1/4" - 2 1/2"
  • Nail Capacity:350
  • Operate Pressure (PSI):70-100
  • Tool Height (In.):12-7/8
  • Tool Length (In.):10-9/16
  • Tool Weight (lbs.):5.8
  • Tool Width (In.):5-3/16

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.

Click Model for your price now!

 Features & Benefits:
  • Aluminum housing for job-site durability
  • Quick-release canister for fast, easy loading
  • Adjustable depth-control for flush nailing
  • Rubber grip for comfort
  • Adjustable deflector conveniently directs exhaust
  • High-impact composite canister survives falls
  • Large-capacity holds up to 350 nails

Buy air nailers and air nails at DS Manco online. 15 degree coil nailers and coil nails are here. Applications include crating, fencing and siding.

Uses .080 - .109 Shank Diameter 15 Wire or Plastic Collated Coil Nails. Available: Coated, Galvanized, Stainless Steel; Brown & White - 15° Wire & Plastic Collated

 

Pneumatic Tools - Pneumatic Nailers - Air Nailers - 15 Degree Wire Collated Coil Siding Nailers, Crating Nailers, Fencing Nailers and Coil Nailers for construction, furniture or industrial applications.
 

15 Degree Coil Siding Nailers
  Click Item Number for Your Price Coil Nailers - Siding, Crating, Fencing Pneumatic Tool Description Magazine Capacity Weight Per Tool (lbs)
  N57C-1 Contact Trip, .080-.090  1 1/4“-2 1/4”, 15° Wire Collated

350

 5.6
  N57C-2 Sequential, .080-.090  1 1/4“-2 1/4”, 15° Wire Collated 350 5.6
  N64C-1 Contact Trip, .080-.100  1 1/4“-2 1/2”, 15° Wire Collated 350 5.8
  N64C-2 Sequential, .080-.100  1 1/4“-2 1/2”, 15° Wire Collated 350 5.8
  112670 Door conversion kit: Accessory Item Allows N64CP to accept 15° Plastic Collated Aluminum .099-.109 Shank Nail N/A 0.9
  103378 N57C Adjustable Trip Assembly N/A N/A
  Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual.  Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings.  Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important.  Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Evaluate your application to determine the best trigger.  See Safety Information for Trip Operation!

Case Quantities, Box Quantities, Roll Quantities, Descriptions, Weights and Pricing are subject to change without notice. It is our policy to make every effort to notify customers of such changes prior to shipping. Our pricing is from time of shipment. Any returns must be received at our warehouse within three weeks after packagingandfastening.com™ has shipped your order from our warehouse. To return product, you must contact us to receive a Return of Goods Authorization Number. No returns are acceptable without the RGA Number. All returns are subject to a 25% restocking charge.
Custom orders are non-returnable.


Copyright © 2017 packagingandfastening.com™ | All rights reserved.