Headless Pin Nailers - Headless Pins

Pneumatic Pin Nailers - Pneumatic Pin Nails

Click Model Number for Your Price

HP118K

Pneumatic 23 gauge headless pins and air pin nailers are online now at DS Manco.Pneumatic 23 gauge headless pins and air pin nailers are online now at DS Manco.
Weight 2.2 lbs, 1 kilos
Driving Power 60 inch lbs.
Fastener Gauge 23-Gauge Headless Pin
Fastener Range 1/2" - 1-3/16"
Power to Weight Ratio 27

Pneumatic 23 gauge headless pins and air pin nailers are online now.

Item Number Pneumatic Pin Nailer Description Magazine Capacity Weight per Tool (lbs)
HP118K Trigger Fire, 1/2" - 1 3/16", 23 Gauge Pin Nailer Kit includes case, fasteners, oil

100

2.2
TU-216-2330 Trigger Fire, 1/2" - 1 3/16", 23 Gauge Pin

100

2.2

Pneumatic 23 gauge headless pins and air pin nailers are online now at DS Manco.

Fasteners are sold in Case Quantities Only

 1 Case Minimum

Pneumatic 18 Gauge - 23 Gauge Headless Pins

Click Item Number for Your Price

Pneumatic 23 Gauge Headless Pins
Item Number Length (inches)  Pin Gauge Pin Finish Pins per Box Boxes per Case Pins Fit Pin Nailers Below: Weight Per Case (lbs) Cases per Pallet Unit of Measure
PT-2312-3M 1/2 23 Coated 3M 60 HP118K, TU-216-2330 13.2 N/A 1 Case
PT-2319-3M 3/4 23 Coated 3M 60 HP118K, TU-216-2330 19.2 N/A 1 Case
PT-2325-3M 1 23 Coated 3M 60 HP118K, TU-216-2330 25.2 N/A 1 Case
PT-2330-3M  1 3/16 23 Coated 3M 60 HP118K, TU-216-2330 31.2 N/A 1 Case
                   
BA-S114P90 9/16 18 Ga Coated 5M 18 Bea S100, BA-T520 N/A 1512 1 Case
BA-S116P80 5/8 18 Ga Coated 5M 16 Bea S100, BA-T520 N/A 1344 1 Case
BA-S119P70 3/4 18 Ga Coated 5M 14 Bea S100, BA-T520 N/A 1176 1 Case
BAS-125P50 1 18 Ga Coated 5M 10 Bea S100, BA-T520 N/A 840 1 Case
                   
BA-S710P288 3/8 22 Ga. Coated 12M 24 Bea S700, BA-T410 N/A 2016 1 Case
BA-S712P240 1/2 22 Ga. Coated 12M 20 Bea S700, BA-T410 N/A 1680 1 Case
BA-S714P216 9/16 22 Ga. Coated 12M 18 Bea S700, BA-T410 N/A 1512 1 Case
BA-S717P168 11/16 22 Ga. Coated 12M 14 Bea S700, BA-T410 N/A 1176 1 Case
Information Regarding Corrosion - Steel fasteners are made from galvanized wire and not treated after fasteners are manufactured.  As such, the manufacturer does not guarantee or warranty product against corrosion for any specified time.  Zinc coatings on nails and staples can help with corrosion.  However, high humidity, salt air, acidic wood, industrial gases, installation impact, preservatives and fire retardants containing salts, can break down the Zinc coating and cause fasteners to rust.  Harsh conditions may call for special material coating or special fasteners such as aluminum or stainless steel.  Wood manufacturers may call for special or high grade galvanized fasteners which if not used void their product warrantees.  Always check the wood manufacturers' specifications beforehand to insure full compliance with their requirements.