Metal Connector Nails for Construction

35 Degree Paper Tape Collated Full Round Head Pneumatic Metal Connector Nails

 Pneumatic nails - air nails - metal connector nails and paper collated metal connector stick nails for:
Paper Collated Metal Connector Stick Nails

Strapshot™ Metal Connector Nailer

 Two nailers in one

  • Strapping

  • Joist Hangers

  • Hurricane Ties

  • Rafter Ties/Connectors

  • Post Bases and Caps

  • Anchors

1 1/2 - 2 1/2 Inch Metal Connector Nailer

MCN-250Buy the 33 degree paper tape collated Stanley Bostitch STRAPSHOT metal connector nailer online now for bright or Thickcoat heat treated galvanized metal connector nails.

 Pneumatic Framing and Metal Connector Nailer

 Stanley Bostitch pneumatic round head paper tape collated framing stick nailers are online now. F33PT
Buy 33 degree paper tape collated metal connector nails and metal connector nailers online.
Click Item for your Price Length (Inches) Points Finish Shank Type Stick Nails Below Fit Bostitch Nailers Listed: Metal Connector Nails Below Fit  Nailers Listed: Quantity Per Case Weight Per Case Bend yield = PSI
PT-MC13115-1M 1-1/2"
Diamond Bright, Heat Treated .131 Smooth F33PT, STRAPSHOT™ MCN-150, MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 7.2 100,000
PT-MC13115GAL1M 1-1/2" Diamond Thickcoat™ Heat Treated Galvanized .131 Smooth F33PT, STRAPSHOT™ MCN-150, MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 7.2 100,000
PT-MC13125-1M 2-1/2" Diamond Bright, Heat Treated .131 Smooth F33PT, STRAPSHOT™ MCN-150, MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 9.85 100,000
PT-MC13125GAL1M 2-1/2" Diamond Thickcoat™ Galvanized, Heat Treated .131 Smooth F33PT, STRAPSHOT™ MCN-150, MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 9.85 100,000
PT-MC14815-1M 1-1/2" Diamond Bright, Heat Treated .148 Smooth F33PT, STRAPSHOT™ MCN-150, MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 7.8 90,000
PT-MC14815GAL1M 1-1/2" Diamond Thickcoat™ Galvanized, Heat Treated .148 Smooth F33PT, STRAPSHOT™ MCN-150, MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 7.8 90,000
PT-MC14825-1M 2-1/2" Diamond Bright, Heat Treated .148 Smooth F33PT, STRAPSHOT™  MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 12 90,000
PT-MC14825GAL-1M 2-1/2" Diamond Thickcoat™ Galvanized, Heat Treated .148 Smooth F33PT, STRAPSHOT™  MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 12 90,000
PT-MC16225-1M 2-1/2" Diamond Bright, Heat Treated  .162 Smooth F33PT, STRAPSHOT™  MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 14.5 90,000
PT-MC16225GAL1M 2-1/2" Diamond Thickcoat™ Galvanized, Heat Treated .162" Smooth F33PT, STRAPSHOT™  MCN-250 Paslode 5250/65G PP, Hitachi NR 65AK 1,000 14.5 90,000

 

Buy 33 degree paper tape collated metal connector nails and metal connector nailers online.

Information Regarding Corrosion - For many years, the industry standard wood preservative has been CCA (Chromated Copper Arsenate). Effective January 1st, 2004, the pressure treated wood industry voluntarily agreed to remove arsenic from the wood treating process. Internal and independent testing has proven that the “new” pressure treated wood formulations (Alkaline Copper Quaternary - ACQ, Copper Azole, etc.) are more corrosive to fasteners

Bostitch recognizes the need to offer fastener solutions to address code official requirements, wood manufacturers recommendations, and most of all, construction professionals concerns. For the most extreme corrosive environments, stainless steel fasteners are the best recommendation. Bostitch currently offers grade 304 stainless steel fasteners in all types of collation. For fasteners used with the new pressure treated wood in less corrosive environments, Bostitch has you covered.

For our full line of wire-welded stick and coil nails, Bostitch introduces THICKCOAT™ galvanization. This new technology in galvanization was designed specifically to protect against today’s more corrosive pressure treated lumber. This new coating technology uses an enhanced electro-galvanization process to apply more than 2½ times the amount of zinc than conventional electro-plating. Coupled with this dense zinc coating is a rust-resistant chromate overcoat. AWPA E-12 laboratory testing has shown that THICKCOAT™ galvanized fasteners corrode at approximately half the rate of our leading competitors.

For plastic collated round head strip nails, Bostitch offers a full line of Hot Dipped Galvanized nails. Our Hot Dipped Galvanized nails meet or exceed ASTM A153 zinc weight specification. This ensures a thick zinc coating to provide superior corrosion resistance.

Bostitch continues to conduct the most extensive corrosion testing of fasteners in the industry. Our testing is conducted in accordance with the ASTM B117 or AWPA E-12 specifications. This testing is what gives us the confidence to recommend our stainless steel, Thickcoat™ galvanized and hot dipped galvanized fasteners for use in the new pressure treated wood.